Download Polyboard 7.02c Pro PP Edition (crack included)
If you've got a CNC machine, or you're planning to buy one, your choice of design software will be based not just on the quality of the software but also on it's ability to work with your machine.
In fact, that's the first question we normally get asked.
For some of the major CNC brands we have created a specific post processor that outputs files for the machine's CAM software in its native file format, for example MPR files for woodWOP/Homag, CIX or CID files for bSolid/Biesse, TCN files for TpaCAD/Felder, XXL files for Xilog/SCM, or HOP files for NC-HOPS/Holz-her and others.
This is ready to load into the CAM software for immediate output of the machine code. There is no extra processing to be done in the CAM software, all parameters and tool paths are already included.
The configuration of each of these post processors is highly customisable within Polyboard to match your specific production method. The integration is seamless and very fast.
There are 100s if not 1000s of CNC manufacturers worldwide. If your machine is not one of those for which we have a specific post processor, Polyboard outputs layered DXF files of each part that you load into a CAM software. These files will provide the geometry which can be processed in a CAM program to create the GCode to run your machine. Again, the DXF output can be fine tuned to the exact requirements of the CAM program you are running.
The whole process is highly automated and takes only a minute or two to process through the CAM software and output the complete machine code to run your CNC. In fact, many integrations using our DXF post processor are now comparable in speed and performance with a brand specific post processor.
DOWNLOAD LINK